javax.jms

Interface MessageProducer

All Superinterfaces:

AutoCloseable

All Known Subinterfaces:

QueueSender, TopicPublisher

public interface MessageProducer
extends AutoCloseable

A client uses a MessageProducer object to send messages to a destination. A MessageProducer object is created by passing a Destination object to a message-producer creation method supplied by a session.

MessageProducer is the parent interface for all message producers.

A client also has the option of creating a message producer without supplying a destination. In this case, a destination must be provided with every send operation. A typical use for this kind of message producer is to send replies to requests using the request's JMSReplyTo destination.

A client can specify a default delivery mode, priority, time to live and delivery delay for messages sent by a message producer. It can also specify the delivery mode, priority, and time to live for an individual message.

A client can specify a time-to-live value in milliseconds for each message it sends. This value defines a message expiration time that is the sum of the message's time-to-live and the GMT when it is sent (for transacted sends, this is the time the client sends the message, not the time the transaction is committed).

A JMS provider should do its best to expire messages accurately; however, the JMS API does not define the accuracy provided.

Version:

2.0

See Also:

TopicPublisher, QueueSender, Session.createProducer(javax.jms.Destination)

Method Summary

Methods

Modifier and Type	Method and Description
void	close() Closes the message producer.
long	getDeliveryDelay() Gets the minimum length of time in milliseconds that must elapse after a message is sent before the JMS provider may deliver the message to a consumer.
int	getDeliveryMode() Gets the producer's default delivery mode.
Destination	getDestination() Gets the destination associated with this MessageProducer.
boolean	getDisableMessageID() Gets an indication of whether message IDs are disabled.
boolean	getDisableMessageTimestamp() Gets an indication of whether message timestamps are disabled.
int	getPriority() Gets the producer's default priority.
long	getTimeToLive() Gets the default length of time in milliseconds from its dispatch time that a produced message should be retained by the message system.
void	send(Destination destination, Message message) Sends a message to a destination for an unidentified message producer using the MessageProducer's default delivery mode, priority, and time to live.
void	send(Destination destination, Message message, CompletionListener completionListener) Sends a message to a destination for an unidentified message producer, using the MessageProducer's default delivery mode, priority, and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed.
void	send(Destination destination, Message message, int deliveryMode, int priority, long timeToLive) Sends a message to a destination for an unidentified message producer, specifying delivery mode, priority and time to live.
void	send(Destination destination, Message message, int deliveryMode, int priority, long timeToLive, CompletionListener completionListener) Sends a message to a destination for an unidentified message producer, specifying delivery mode, priority and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed.
void	send(Message message) Sends a message using the MessageProducer's default delivery mode, priority, and time to live.
void	send(Message message, CompletionListener completionListener) Sends a message using the MessageProducer's default delivery mode, priority, and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed.
void	send(Message message, int deliveryMode, int priority, long timeToLive) Sends a message, specifying delivery mode, priority, and time to live.
void	send(Message message, int deliveryMode, int priority, long timeToLive, CompletionListener completionListener) Sends a message, specifying delivery mode, priority and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed.
void	setDeliveryDelay(long deliveryDelay) Sets the minimum length of time in milliseconds that must elapse after a message is sent before the JMS provider may deliver the message to a consumer.
void	setDeliveryMode(int deliveryMode) Sets the producer's default delivery mode.
void	setDisableMessageID(boolean value) Specify whether message IDs may be disabled.
void	setDisableMessageTimestamp(boolean value) Specify whether message timestamps may be disabled.
void	setPriority(int defaultPriority) Sets the producer's default priority.
void	setTimeToLive(long timeToLive) Sets the default length of time in milliseconds from its dispatch time that a produced message should be retained by the message system.

Method Detail

setDisableMessageID

void setDisableMessageID(boolean value)
                         throws JMSException

Specify whether message IDs may be disabled.

Since message IDs take some effort to create and increase a message's size, some JMS providers may be able to optimise message overhead if they are given a hint that the message ID is not used by an application. By calling this method, a JMS application enables this potential optimisation for all messages sent using this MessageProducer. If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value.

Message IDs are enabled by default.

Parameters:

value - indicates if message IDs may be disabled

Throws:

JMSException - if the JMS provider fails to set message ID to disabled due to some internal error.

getDisableMessageID

boolean getDisableMessageID()
                            throws JMSException

Gets an indication of whether message IDs are disabled.

Returns:

an indication of whether message IDs are disabled

Throws:

JMSException - if the JMS provider fails to determine if message IDs are disabled due to some internal error.

setDisableMessageTimestamp

void setDisableMessageTimestamp(boolean value)
                                throws JMSException

Specify whether message timestamps may be disabled.

Since timestamps take some effort to create and increase a message's size, some JMS providers may be able to optimise message overhead if they are given a hint that the timestamp is not used by an application. By calling this method, a JMS application enables this potential optimisation for all messages sent using this MessageProducer. If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint, the timestamp must be set to its normal value.

Message timestamps are enabled by default.

Parameters:

value - indicates whether message timestamps may be disabled

Throws:

JMSException - if the JMS provider fails to set timestamps to disabled due to some internal error.

getDisableMessageTimestamp

boolean getDisableMessageTimestamp()
                                   throws JMSException

Gets an indication of whether message timestamps are disabled.

Returns:

an indication of whether message timestamps are disabled

Throws:

JMSException - if the JMS provider fails to determine if timestamps are disabled due to some internal error.

setDeliveryMode

void setDeliveryMode(int deliveryMode)
                     throws JMSException

Sets the producer's default delivery mode.

Delivery mode is set to PERSISTENT by default.

Parameters:

deliveryMode - the message delivery mode for this message producer; legal values are DeliveryMode.NON_PERSISTENT and DeliveryMode.PERSISTENT

Throws:

JMSException - if the JMS provider fails to set the delivery mode due to some internal error.

See Also:

getDeliveryMode(), DeliveryMode.NON_PERSISTENT, DeliveryMode.PERSISTENT, Message.DEFAULT_DELIVERY_MODE

getDeliveryMode

int getDeliveryMode()
                    throws JMSException

Gets the producer's default delivery mode.

Returns:

the message delivery mode for this message producer

Throws:

JMSException - if the JMS provider fails to get the delivery mode due to some internal error.

See Also:

setDeliveryMode(int)

setPriority

void setPriority(int defaultPriority)
                 throws JMSException

Sets the producer's default priority.

The JMS API defines ten levels of priority value, with 0 as the lowest priority and 9 as the highest. Clients should consider priorities 0-4 as gradations of normal priority and priorities 5-9 as gradations of expedited priority. Priority is set to 4 by default.

Parameters:

defaultPriority - the message priority for this message producer; must be a value between 0 and 9

Throws:

JMSException - if the JMS provider fails to set the priority due to some internal error.

See Also:

getPriority(), Message.DEFAULT_PRIORITY

getPriority

int getPriority()
                throws JMSException

Gets the producer's default priority.

Returns:

the message priority for this message producer

Throws:

JMSException - if the JMS provider fails to get the priority due to some internal error.

See Also:

setPriority(int)

setTimeToLive

void setTimeToLive(long timeToLive)
                   throws JMSException

Sets the default length of time in milliseconds from its dispatch time that a produced message should be retained by the message system.

Time to live is set to zero by default.

Parameters:

timeToLive - the message time to live in milliseconds; zero is unlimited

Throws:

JMSException - if the JMS provider fails to set the time to live due to some internal error.

See Also:

getTimeToLive(), Message.DEFAULT_TIME_TO_LIVE

getTimeToLive

long getTimeToLive()
                   throws JMSException

Gets the default length of time in milliseconds from its dispatch time that a produced message should be retained by the message system.

Returns:

the message time to live in milliseconds; zero is unlimited

Throws:

JMSException - if the JMS provider fails to get the time to live due to some internal error.

See Also:

setTimeToLive(long)

setDeliveryDelay

void setDeliveryDelay(long deliveryDelay)
                      throws JMSException

Sets the minimum length of time in milliseconds that must elapse after a message is sent before the JMS provider may deliver the message to a consumer.

For transacted sends, this time starts when the client sends the message, not when the transaction is committed.

deliveryDelay is set to zero by default.

Parameters:

deliveryDelay - the delivery delay in milliseconds.

Throws:

JMSException - if the JMS provider fails to set the delivery delay due to some internal error.

Since:

2.0

See Also:

getDeliveryDelay(), Message.DEFAULT_DELIVERY_DELAY

getDeliveryDelay

long getDeliveryDelay()
                      throws JMSException

Gets the minimum length of time in milliseconds that must elapse after a message is sent before the JMS provider may deliver the message to a consumer.

Returns:

the delivery delay in milliseconds.

Throws:

JMSException - if the JMS provider fails to get the delivery delay due to some internal error.

Since:

2.0

See Also:

setDeliveryDelay(long)

getDestination

Destination getDestination()
                           throws JMSException

Gets the destination associated with this MessageProducer.

Returns:

this producer's Destination

Throws:

JMSException - if the JMS provider fails to get the destination for this MessageProducer due to some internal error.

Since:

1.1

close

void close()
           throws JMSException

Closes the message producer.

Since a provider may allocate some resources on behalf of a MessageProducer outside the Java virtual machine, clients should close them when they are not needed. Relying on garbage collection to eventually reclaim these resources may not be timely enough.

This method must not return until any incomplete asynchronous send operations for this MessageProducer have been completed and any CompletionListener callbacks have returned. Incomplete sends should be allowed to complete normally unless an error occurs.

A CompletionListener callback method must not call close on its own MessageProducer. Doing so will cause an IllegalStateException to be thrown.

Specified by:

close in interface AutoCloseable

Throws:

IllegalStateException - this method has been called by a CompletionListener callback method on its own MessageProducer

JMSException - if the JMS provider fails to close the producer due to some internal error.

send

void send(Message message)
          throws JMSException

Sends a message using the MessageProducer's default delivery mode, priority, and time to live.

Parameters:

message - the message to send

Throws:

JMSException - if the JMS provider fails to send the message due to some internal error.

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with a MessageProducer with an invalid destination.

UnsupportedOperationException - if a client uses this method with a MessageProducer that did not specify a destination at creation time.

Since:

1.1

See Also:

Session.createProducer(javax.jms.Destination)

send

void send(Message message,
        int deliveryMode,
        int priority,
        long timeToLive)
          throws JMSException

Sends a message, specifying delivery mode, priority, and time to live.

Parameters:

message - the message to send

deliveryMode - the delivery mode to use

priority - the priority for this message

timeToLive - the message's lifetime (in milliseconds)

Throws:

JMSException - if the JMS provider fails to send the message due to some internal error.

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with a MessageProducer with an invalid destination.

UnsupportedOperationException - if a client uses this method with a MessageProducer that did not specify a destination at creation time.

Since:

1.1

See Also:

Session.createProducer(javax.jms.Destination)

send

void send(Destination destination,
        Message message)
          throws JMSException

Sends a message to a destination for an unidentified message producer using the MessageProducer's default delivery mode, priority, and time to live.

Typically, a message producer is assigned a destination at creation time; however, the JMS API also supports unidentified message producers, which require that the destination be supplied every time a message is sent.

Parameters:

destination - the destination to send this message to

message - the message to send

Throws:

JMSException - if the JMS provider fails to send the message due to some internal error.

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with an invalid destination.

UnsupportedOperationException - if a client uses this method with a MessageProducer that specified a destination at creation time.

Since:

1.1

See Also:

Session.createProducer(javax.jms.Destination)

send

void send(Destination destination,
        Message message,
        int deliveryMode,
        int priority,
        long timeToLive)
          throws JMSException

Sends a message to a destination for an unidentified message producer, specifying delivery mode, priority and time to live.

Typically, a message producer is assigned a destination at creation time; however, the JMS API also supports unidentified message producers, which require that the destination be supplied every time a message is sent.

Parameters:

destination - the destination to send this message to

message - the message to send

deliveryMode - the delivery mode to use

priority - the priority for this message

timeToLive - the message's lifetime (in milliseconds)

Throws:

JMSException - if the JMS provider fails to send the message due to some internal error.

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with an invalid destination.

UnsupportedOperationException - if a client uses this method with a MessageProducer that specified a destination at creation time.

Since:

1.1

See Also:

Session.createProducer(javax.jms.Destination)

send

void send(Message message,
        CompletionListener completionListener)
          throws JMSException

Sends a message using the MessageProducer's default delivery mode, priority, and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed. JMS refers to this as an "asynchronous send".

When the message has been successfully sent the JMS provider invokes the callback method onCompletion on an application-specified CompletionListener object. Only when that callback has been invoked can the application be sure that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed. An application which requires this degree of confidence must therefore wait for the callback to be invoked before continuing.

The following information is intended to give an indication of how an asynchronous send would typically be implemented.

In some JMS providers, a normal synchronous send involves sending the message to a remote JMS server and then waiting for an acknowledgement to be received before returning. It is expected that such a provider would implement an asynchronous send by sending the message to the remote JMS server and then returning without waiting for an acknowledgement. When the acknowledgement is received, the JMS provider would notify the application by invoking the onCompletion method on the application-specified CompletionListener object. If for some reason the acknowledgement is not received the JMS provider would notify the application by invoking the CompletionListener's onException method.

In those cases where the JMS specification permits a lower level of reliability, a normal synchronous send might not wait for an acknowledgement. In that case it is expected that an asynchronous send would be similar to a synchronous send: the JMS provider would send the message to the remote JMS server and then return without waiting for an acknowledgement. However the JMS provider would still notify the application that the send had completed by invoking the onCompletion method on the application-specified CompletionListener object.

It is up to the JMS provider to decide exactly what is performed in the calling thread and what, if anything, is performed asynchronously, so long as it satisfies the requirements given below:

Quality of service: After the send operation has completed successfully, which means that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed, the JMS provider must invoke the CompletionListener's onCompletion method. The CompletionListener must not be invoked earlier than this.

Exceptions: If an exception is encountered during the call to the send method then an appropriate exception should be thrown in the thread that is calling the send method. In this case the JMS provider must not invoke the CompletionListener's onCompletion or onException method. If an exception is encountered which cannot be thrown in the thread that is calling the send method then the JMS provider must call the CompletionListener's onException method. In both cases if an exception occurs it is undefined whether or not the message was successfully sent.

Message order: If the same MessageProducer is used to send multiple messages then JMS message ordering requirements must be satisfied. This applies even if a combination of synchronous and asynchronous sends has been performed. The application is not required to wait for an asynchronous send to complete before sending the next message.

Close, commit or rollback: If the close method is called on the MessageProducer or its Session or Connection then the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before closing the object and returning. If the session is transacted (uses a local transaction) then when the Session's commit or rollback method is called the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before performing the commit or rollback. Incomplete sends should be allowed to complete normally unless an error occurs.

A CompletionListener callback method must not call close on its own Connection, Session or MessageProducer or call commit or rollback on its own Session. Doing so will cause the close, commit or rollback to throw an IllegalStateException.

Restrictions on usage in Java EE An asynchronous send is not permitted in a Java EE EJB or web container. If the application component violates this restriction this method may throw a JMSException.

Message headers JMS defines a number of message header fields and message properties which must be set by the "JMS provider on send". If the send is asynchronous these fields and properties may be accessed on the sending client only after the CompletionListener has been invoked. If the CompletionListener's onException method is called then the state of these message header fields and properties is undefined.

Restrictions on threading: Applications that perform an asynchronous send must confirm to the threading restrictions defined in JMS. This means that the session may be used by only one thread at a time.

Setting a CompletionListener does not cause the session to be dedicated to the thread of control which calls the CompletionListener. The application thread may therefore continue to use the session after performing an asynchronous send. However the CompletionListener's callback methods must not use the session if an application thread might be using the session at the same time.

Use of the CompletionListener by the JMS provider: A session will only invoke one CompletionListener callback method at a time. For a given MessageProducer, callbacks (both onCompletion and onException) will be performed in the same order as the corresponding calls to the asynchronous send method. A JMS provider must not invoke the CompletionListener from the thread that is calling the asynchronous send method.

Restrictions on the use of the Message object: Applications which perform an asynchronous send must take account of the restriction that a Message object is designed to be accessed by one logical thread of control at a time and does not support concurrent use.

After the send method has returned, the application must not attempt to read the headers, properties or payload of the Message object until the CompletionListener's onCompletion or onException method has been called. This is because the JMS provider may be modifying the Message object in another thread during this time. The JMS provider may throw an JMSException if the application attempts to access or modify the Message object after the send method has returned and before the CompletionListener has been invoked. If the JMS provider does not throw an exception then the behaviour is undefined.

Parameters:

message - the message to send

completionListener - a CompletionListener to be notified when the send has completed

Throws:

JMSException - if an internal error occurs

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with a MessageProducer with an invalid destination.

IllegalArgumentException - if the specified CompletionListener is null

UnsupportedOperationException - if a client uses this method with a MessageProducer that did not specify a destination at creation time.

Since:

2.0

See Also:

Session.createProducer(javax.jms.Destination), CompletionListener

send

void send(Message message,
        int deliveryMode,
        int priority,
        long timeToLive,
        CompletionListener completionListener)
          throws JMSException

Sends a message, specifying delivery mode, priority and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed. JMS refers to this as an "asynchronous send".

When the message has been successfully sent the JMS provider invokes the callback method onCompletion on an application-specified CompletionListener object. Only when that callback has been invoked can the application be sure that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed. An application which requires this degree of confidence must therefore wait for the callback to be invoked before continuing.

The following information is intended to give an indication of how an asynchronous send would typically be implemented.

In some JMS providers, a normal synchronous send involves sending the message to a remote JMS server and then waiting for an acknowledgement to be received before returning. It is expected that such a provider would implement an asynchronous send by sending the message to the remote JMS server and then returning without waiting for an acknowledgement. When the acknowledgement is received, the JMS provider would notify the application by invoking the onCompletion method on the application-specified CompletionListener object. If for some reason the acknowledgement is not received the JMS provider would notify the application by invoking the CompletionListener's onException method.

In those cases where the JMS specification permits a lower level of reliability, a normal synchronous send might not wait for an acknowledgement. In that case it is expected that an asynchronous send would be similar to a synchronous send: the JMS provider would send the message to the remote JMS server and then return without waiting for an acknowledgement. However the JMS provider would still notify the application that the send had completed by invoking the onCompletion method on the application-specified CompletionListener object.

It is up to the JMS provider to decide exactly what is performed in the calling thread and what, if anything, is performed asynchronously, so long as it satisfies the requirements given below:

Quality of service: After the send operation has completed successfully, which means that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed, the JMS provider must invoke the CompletionListener's onCompletion method. The CompletionListener must not be invoked earlier than this.

Exceptions: If an exception is encountered during the call to the send method then an appropriate exception should be thrown in the thread that is calling the send method. In this case the JMS provider must not invoke the CompletionListener's onCompletion or onException method. If an exception is encountered which cannot be thrown in the thread that is calling the send method then the JMS provider must call the CompletionListener's onException method. In both cases if an exception occurs it is undefined whether or not the message was successfully sent.

Message order: If the same MessageProducer is used to send multiple messages then JMS message ordering requirements must be satisfied. This applies even if a combination of synchronous and asynchronous sends has been performed. The application is not required to wait for an asynchronous send to complete before sending the next message.

Close, commit or rollback: If the close method is called on the MessageProducer or its Session or Connection then the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before closing the object and returning. If the session is transacted (uses a local transaction) then when the Session's commit or rollback method is called the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before performing the commit or rollback. Incomplete sends should be allowed to complete normally unless an error occurs.

A CompletionListener callback method must not call close on its own Connection, Session or MessageProducer or call commit or rollback on its own Session. Doing so will cause the close, commit or rollback to throw an IllegalStateException.

Restrictions on usage in Java EE An asynchronous send is not permitted in a Java EE EJB or web container. If the application component violates this restriction this method may throw a JMSException.

Message headers JMS defines a number of message header fields and message properties which must be set by the "JMS provider on send". If the send is asynchronous these fields and properties may be accessed on the sending client only after the CompletionListener has been invoked. If the CompletionListener's onException method is called then the state of these message header fields and properties is undefined.

Restrictions on threading: Applications that perform an asynchronous send must confirm to the threading restrictions defined in JMS. This means that the session may be used by only one thread at a time.

Setting a CompletionListener does not cause the session to be dedicated to the thread of control which calls the CompletionListener. The application thread may therefore continue to use the session after performing an asynchronous send. However the CompletionListener's callback methods must not use the session if an application thread might be using the session at the same time.

Use of the CompletionListener by the JMS provider: A session will only invoke one CompletionListener callback method at a time. For a given MessageProducer, callbacks (both onCompletion and onException) will be performed in the same order as the corresponding calls to the asynchronous send method. A JMS provider must not invoke the CompletionListener from the thread that is calling the asynchronous send method.

Restrictions on the use of the Message object: Applications which perform an asynchronous send must take account of the restriction that a Message object is designed to be accessed by one logical thread of control at a time and does not support concurrent use.

After the send method has returned, the application must not attempt to read the headers, properties or payload of the Message object until the CompletionListener's onCompletion or onException method has been called. This is because the JMS provider may be modifying the Message object in another thread during this time. The JMS provider may throw an JMSException if the application attempts to access or modify the Message object after the send method has returned and before the CompletionListener has been invoked. If the JMS provider does not throw an exception then the behaviour is undefined.

Parameters:

message - the message to send

deliveryMode - the delivery mode to use

priority - the priority for this message

timeToLive - the message's lifetime (in milliseconds)

completionListener - a CompletionListener to be notified when the send has completed

Throws:

JMSException - if an internal error occurs

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with a MessageProducer with an invalid destination.

IllegalArgumentException - if the specified CompletionListener is null

UnsupportedOperationException - if a client uses this method with a MessageProducer that did not specify a destination at creation time.

Since:

2.0

See Also:

Session.createProducer(javax.jms.Destination), CompletionListener

send

void send(Destination destination,
        Message message,
        CompletionListener completionListener)
          throws JMSException

Sends a message to a destination for an unidentified message producer, using the MessageProducer's default delivery mode, priority, and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed. JMS refers to this as an "asynchronous send".

Typically, a message producer is assigned a destination at creation time; however, the JMS API also supports unidentified message producers, which require that the destination be supplied every time a message is sent.

When the message has been successfully sent the JMS provider invokes the callback method onCompletion on an application-specified CompletionListener object. Only when that callback has been invoked can the application be sure that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed. An application which requires this degree of confidence must therefore wait for the callback to be invoked before continuing.

The following information is intended to give an indication of how an asynchronous send would typically be implemented.

In some JMS providers, a normal synchronous send involves sending the message to a remote JMS server and then waiting for an acknowledgement to be received before returning. It is expected that such a provider would implement an asynchronous send by sending the message to the remote JMS server and then returning without waiting for an acknowledgement. When the acknowledgement is received, the JMS provider would notify the application by invoking the onCompletion method on the application-specified CompletionListener object. If for some reason the acknowledgement is not received the JMS provider would notify the application by invoking the CompletionListener's onException method.

In those cases where the JMS specification permits a lower level of reliability, a normal synchronous send might not wait for an acknowledgement. In that case it is expected that an asynchronous send would be similar to a synchronous send: the JMS provider would send the message to the remote JMS server and then return without waiting for an acknowledgement. However the JMS provider would still notify the application that the send had completed by invoking the onCompletion method on the application-specified CompletionListener object.

It is up to the JMS provider to decide exactly what is performed in the calling thread and what, if anything, is performed asynchronously, so long as it satisfies the requirements given below:

Quality of service: After the send operation has completed successfully, which means that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed, the JMS provider must invoke the CompletionListener's onCompletion method. The CompletionListener must not be invoked earlier than this.

Exceptions: If an exception is encountered during the call to the send method then an appropriate exception should be thrown in the thread that is calling the send method. In this case the JMS provider must not invoke the CompletionListener's onCompletion or onException method. If an exception is encountered which cannot be thrown in the thread that is calling the send method then the JMS provider must call the CompletionListener's onException method. In both cases if an exception occurs it is undefined whether or not the message was successfully sent.

Message order: If the same MessageProducer is used to send multiple messages then JMS message ordering requirements must be satisfied. This applies even if a combination of synchronous and asynchronous sends has been performed. The application is not required to wait for an asynchronous send to complete before sending the next message.

Close, commit or rollback: If the close method is called on the MessageProducer or its Session or Connection then the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before closing the object and returning. If the session is transacted (uses a local transaction) then when the Session's commit or rollback method is called the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before performing the commit or rollback. Incomplete sends should be allowed to complete normally unless an error occurs.

A CompletionListener callback method must not call close on its own Connection, Session or MessageProducer or call commit or rollback on its own Session. Doing so will cause the close, commit or rollback to throw an IllegalStateException.

Restrictions on usage in Java EE An asynchronous send is not permitted in a Java EE EJB or web container. If the application component violates this restriction this method may throw a JMSException.

Message headers JMS defines a number of message header fields and message properties which must be set by the "JMS provider on send". If the send is asynchronous these fields and properties may be accessed on the sending client only after the CompletionListener has been invoked. If the CompletionListener's onException method is called then the state of these message header fields and properties is undefined.

Restrictions on threading: Applications that perform an asynchronous send must confirm to the threading restrictions defined in JMS. This means that the session may be used by only one thread at a time.

Setting a CompletionListener does not cause the session to be dedicated to the thread of control which calls the CompletionListener. The application thread may therefore continue to use the session after performing an asynchronous send. However the CompletionListener's callback methods must not use the session if an application thread might be using the session at the same time.

Use of the CompletionListener by the JMS provider: A session will only invoke one CompletionListener callback method at a time. For a given MessageProducer, callbacks (both onCompletion and onException) will be performed in the same order as the corresponding calls to the asynchronous send method. A JMS provider must not invoke the CompletionListener from the thread that is calling the asynchronous send method.

Restrictions on the use of the Message object: Applications which perform an asynchronous send must take account of the restriction that a Message object is designed to be accessed by one logical thread of control at a time and does not support concurrent use.

After the send method has returned, the application must not attempt to read the headers, properties or payload of the Message object until the CompletionListener's onCompletion or onException method has been called. This is because the JMS provider may be modifying the Message object in another thread during this time. The JMS provider may throw an JMSException if the application attempts to access or modify the Message object after the send method has returned and before the CompletionListener has been invoked. If the JMS provider does not throw an exception then the behaviour is undefined.

Parameters:

destination - the destination to send this message to

message - the message to send

completionListener - a CompletionListener to be notified when the send has completed

Throws:

JMSException - if an internal error occurs

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with an invalid destination

IllegalArgumentException - if the specified CompletionListener is null

UnsupportedOperationException - if a client uses this method with a MessageProducer that specified a destination at creation time.

Since:

2.0

See Also:

Session.createProducer(javax.jms.Destination), CompletionListener

send

void send(Destination destination,
        Message message,
        int deliveryMode,
        int priority,
        long timeToLive,
        CompletionListener completionListener)
          throws JMSException

Sends a message to a destination for an unidentified message producer, specifying delivery mode, priority and time to live, performing part of the work involved in sending the message in a separate thread and notifying the specified CompletionListener when the operation has completed. JMS refers to this as an "asynchronous send".

Typically, a message producer is assigned a destination at creation time; however, the JMS API also supports unidentified message producers, which require that the destination be supplied every time a message is sent.

When the message has been successfully sent the JMS provider invokes the callback method onCompletion on an application-specified CompletionListener object. Only when that callback has been invoked can the application be sure that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed. An application which requires this degree of confidence must therefore wait for the callback to be invoked before continuing.

The following information is intended to give an indication of how an asynchronous send would typically be implemented.

In some JMS providers, a normal synchronous send involves sending the message to a remote JMS server and then waiting for an acknowledgement to be received before returning. It is expected that such a provider would implement an asynchronous send by sending the message to the remote JMS server and then returning without waiting for an acknowledgement. When the acknowledgement is received, the JMS provider would notify the application by invoking the onCompletion method on the application-specified CompletionListener object. If for some reason the acknowledgement is not received the JMS provider would notify the application by invoking the CompletionListener's onException method.

In those cases where the JMS specification permits a lower level of reliability, a normal synchronous send might not wait for an acknowledgement. In that case it is expected that an asynchronous send would be similar to a synchronous send: the JMS provider would send the message to the remote JMS server and then return without waiting for an acknowledgement. However the JMS provider would still notify the application that the send had completed by invoking the onCompletion method on the application-specified CompletionListener object.

It is up to the JMS provider to decide exactly what is performed in the calling thread and what, if anything, is performed asynchronously, so long as it satisfies the requirements given below:

Quality of service: After the send operation has completed successfully, which means that the message has been successfully sent with the same degree of confidence as if a normal synchronous send had been performed, the JMS provider must invoke the CompletionListener's onCompletion method. The CompletionListener must not be invoked earlier than this.

Exceptions: If an exception is encountered during the call to the send method then an appropriate exception should be thrown in the thread that is calling the send method. In this case the JMS provider must not invoke the CompletionListener's onCompletion or onException method. If an exception is encountered which cannot be thrown in the thread that is calling the send method then the JMS provider must call the CompletionListener's onException method. In both cases if an exception occurs it is undefined whether or not the message was successfully sent.

Message order: If the same MessageProducer is used to send multiple messages then JMS message ordering requirements must be satisfied. This applies even if a combination of synchronous and asynchronous sends has been performed. The application is not required to wait for an asynchronous send to complete before sending the next message.

Close, commit or rollback: If the close method is called on the MessageProducer or its Session or Connection then the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before closing the object and returning. If the session is transacted (uses a local transaction) then when the Session's commit or rollback method is called the JMS provider must block until any incomplete send operations have been completed and all CompletionListener callbacks have returned before performing the commit or rollback. Incomplete sends should be allowed to complete normally unless an error occurs.

A CompletionListener callback method must not call close on its own Connection, Session or MessageProducer or call commit or rollback on its own Session. Doing so will cause the close, commit or rollback to throw an IllegalStateException.

Restrictions on usage in Java EE An asynchronous send is not permitted in a Java EE EJB or web container. If the application component violates this restriction this method may throw a JMSException.

Message headers JMS defines a number of message header fields and message properties which must be set by the "JMS provider on send". If the send is asynchronous these fields and properties may be accessed on the sending client only after the CompletionListener has been invoked. If the CompletionListener's onException method is called then the state of these message header fields and properties is undefined.

Restrictions on threading: Applications that perform an asynchronous send must confirm to the threading restrictions defined in JMS. This means that the session may be used by only one thread at a time.

Setting a CompletionListener does not cause the session to be dedicated to the thread of control which calls the CompletionListener. The application thread may therefore continue to use the session after performing an asynchronous send. However the CompletionListener's callback methods must not use the session if an application thread might be using the session at the same time.

Use of the CompletionListener by the JMS provider: A session will only invoke one CompletionListener callback method at a time. For a given MessageProducer, callbacks (both onCompletion and onException) will be performed in the same order as the corresponding calls to the asynchronous send method. A JMS provider must not invoke the CompletionListener from the thread that is calling the asynchronous send method.

Restrictions on the use of the Message object: Applications which perform an asynchronous send must take account of the restriction that a Message object is designed to be accessed by one logical thread of control at a time and does not support concurrent use.

After the send method has returned, the application must not attempt to read the headers, properties or payload of the Message object until the CompletionListener's onCompletion or onException method has been called. This is because the JMS provider may be modifying the Message object in another thread during this time. The JMS provider may throw an JMSException if the application attempts to access or modify the Message object after the send method has returned and before the CompletionListener has been invoked. If the JMS provider does not throw an exception then the behaviour is undefined.

Parameters:

destination - the destination to send this message to

message - the message to send

deliveryMode - the delivery mode to use

priority - the priority for this message

timeToLive - the message's lifetime (in milliseconds)

completionListener - a CompletionListener to be notified when the send has completed

Throws:

JMSException - if an internal error occurs

MessageFormatException - if an invalid message is specified.

InvalidDestinationException - if a client uses this method with an invalid destination.

IllegalArgumentException - if the specified CompletionListener is null

UnsupportedOperationException - if a client uses this method with a MessageProducer that specified a destination at creation time.

Since:

2.0

See Also:

Session.createProducer(javax.jms.Destination), CompletionListener