Package org.opendaylight.yang.gen.v1.http.openconfig.net.yang.platform.types.rev210118


package org.opendaylight.yang.gen.v1.http.openconfig.net.yang.platform.types.rev210118
  • Class
    Description
    The YangModelBindingProvider for openconfig-platform-types module.
    The ResourceYangModuleInfo for openconfig-platform-types module.
    Component is enabled and active (i.e., up)
    Common grouping for recording temperature values in Celsius with 1 decimal precision.
    Backplane component for aggregating traffic, typically contained in a chassis component
    Software layer responsible for loading and booting the device OS or network OS.
    Chassis component, typically with multiple slots / shelves
    Current operational status of a platform component
    This class represents the following YANG schema fragment defined in module openconfig-platform-types
    A type of linecard whose primary role is management or control rather than data forwarding.
    Processing unit, e.g., a management processor
    Component is administratively disabled.
    Interconnect between ingress and egress ports on the device (e.g., a crossbar switch).
    Cooling fan, or could be some other heat-reduction component
    System will determine whether to enable or disable FEC on a transceiver.
    FEC is administratively disabled.
    FEC is administratively enabled.
    Base identity for FEC operational modes.
    FEC is operationally locked.
    Base identity for FEC operational statuses.
    FEC is operationally unlocked.
    Replaceable hardware component that does not have a more specific defined schema.
    Component is enabled but inactive (i.e., down)
    A special purpose processing unit, typically for traffic switching/forwarding (e.g., switching ASIC, NPU, forwarding chip, etc.)
    Linecard component, typically inserted into a chassis slot
    Base identity for hardware related components in a managed device.
    This module defines data types (e.g., YANG identities) to support the component inventory model.
    Base identity for software-related components in a managed device
    Operating system running on a component
    An operating system update - which should be a subcomponent of the `OPERATING_SYSTEM` running on a component.
    Physical port, e.g., for attaching pluggables and networking cables
    Component that is supplying power to the device
    Physical sensor, e.g., a temperature sensor in a chassis
    A base identity for software modules installed and/or running on the device.
    A storage subsystem on the device (disk, SSD, etc.)
    Pluggable module present in a port